Mercury PR0091 Setting up the controller, Set-upMode Set-upthrough front buttons, Enter, Down

Mercury 6-5 Stat – Installation & User Guide

Setting up the controller

Access to the controller can be achieved several ways

•Through the front mounted buttons

•Direct access by PC or palm top into the rear comms port. This requires a software package available on the RDM website

•Through the RDM Data Director or Data Manager.

Set-up Mode

Set-up through front buttons

ENTER UP

DOWN

To enter set-up mode, hold the Enter and Down buttons together for approximately 3 seconds until the message “Ent” appears on the display. Now press the Enter button again to enter the function menu. IO will be displayed. Scroll up or down to go through the list.

Set-up Function Menu
	Display	Option	Explained in Paragraph
	IO	View Input/Output States	View Input/Output States
	PArA	Set/view Parameters	Set/view parameters
	Unit	Set Probe type and units ( oC or oF)	Set/view units
	TyPE	Set/View Controller Type	Set/view product type
	rtc	Set/view Clock (rtc = Real Time Clock)	Real Time Clock
	nEt	Set/view network configuration	Network Configuration
	SoFt	View software version
	OFSt	Probe offset	Probe Offset
	ESC	Escape back to normal operation

Ensure that all power is
switched off before
installing or maintaining
this product	Revision 1.2	Page 5 of 21