This is the unit that will respond to the remote.
All the other units will be configured
To connect to Meridian 600 or 200 Series equipment
as
N.Con.
If your system includes any Meridian 600 or 200 Series units, with 600 COMMS or 200 COMMS sockets, you should set all
Your system is now set up and ready for use.
●If for any reason the automatic setup does not give the configuration you want, restore the default operation by selecting Type 1 as described in To connect to Meridian 600 or 200 Series equipment, opposite.
●If you want to change the automatic setup configuration refer to the Meridian 500 Series User Guide.
Note: Do not, under any circumstances, connect any equipment other than Meridian 500, 600, or 200 Series to the socket marked COMMS on the back of the FM tuner.
the 500 Series units to 200 COMMS operation using the following procedure:
●Turn off the FM tuner, using the power switch on the back panel.
●Turn on the power again while holding down the Off key on the front panel.
The display will show the current | Type | 1 | |
setup: | |||
|
| ||
Press ] (Next) on the front panel |
|
| |
Type | 2 | ||
to change to Type 2: | |||
|
|
●Switch the power off and on again to restore the FM tuner to normal operation.
●To return to 500 COMMS operation repeat the above procedure, and select Type 1.
Setting up the FM tuner
21
