To set up the preset labels
●Turn off the FM tuner, using the power switch on the back panel.
●Turn on the power again while holding down the Store key on the front panel.
If there was previously no label the display will be blank.
A flashing block cursor shows which character you can change.
●Press A (Up) or V (Down) to change the character.
The display will show:
It will then show the first preset number…
Labels
1
The character cycles through the symbols: 0 – 9, a – z, A – Z, ., and space.
●Press Store to move on to the next character.
●When you have specified all eight characters press Store to store the label.
…followed by the corresponding preset label:
¥adio 1
The display will show:
Stored
the FM tuner
To alter a preset label
●Press ] (Next) or [ (Previous) to select the number of the preset you want to alter.
●When you have finished defining labels, switch the power off and on again to restore the FM tuner to normal operation.
Using
After a short delay the existing
label is shown:
¥adio 3
16
