Setting and Using Camera Presets | Polycom HDX Systems specs

CONTROLLING WHAT YOU SEE

To adjust a camera using the remote control:

1.Press Near or Far to select either near-site or far-site control. During a multipoint call being hosted by a system in the call, you can only adjust a camera at the far site that is currently speaking.

2.Press the arrow buttons on the remote control to move the camera up, down, left, or right.

3.Press Zoom to zoom out or in.

Setting and Using Camera Presets

Camera presets are stored camera positions that you can create ahead of time or during a call.

Presets allow you to:

Automatically point a camera at pre-defined locations in a room.

Select a video source such as a VCR or DVD player, a document camera, or an auxiliary camera.

If your system’s camera supports electronic pan, tilt, and zoom movement, you can create up to 100 preset camera positions (0-99) for the near site. Each preset stores the camera number, its zoom level, and the direction it points (if appropriate). They remain in effect until you delete or change them.

If far-site camera control is allowed, you can create up to 16 presets (0-15) for the far-site camera. These presets are saved only for the duration of the call. You may also be able to use presets that were created at the far site to control the far-site camera.

To move the camera to a preset:

1.If a call is connected, press Near or Far, then choose a near-site or far-site camera.

2.Press a number on the remote control.

To view your near-site presets:

¾Press Preset on the remote control.

Icons for presets 0-9 are shown on the screen. The colored icons indicate stored camera positions, and the gray icons indicate available presets.

© Polycom, Inc.

9

Image 13

Polycom HDX Systems manual Setting and Using Camera Presets, To adjust a camera using the remote control

Contents

User’s Guide Patent Information Trademark Information Contents Using Microsoft LCS Features with Video Calls User’s Guide Using the Remote Control Answering a Video Call Calling and AnsweringPlacing a Video Call Calling by Entering a Name or Number Calling from the Recent Calls List To place a call using the Speed Dial or Contacts listCalling from the Contacts or Speed Dial List To place a call from the Recent Calls screen Calling from the Directory Ending a Video CallTo place a call from the directory To hang up from a call From… You can call… By dialing… Types of Calls You Can Make Placing an Audio-only Call Placing Audio-only Calls and Adding Audio-only SitesAdding an Audio-only Call to a Video Call Adding a Video Call to an Audio-only Call Controlling What You See Selecting and Adjusting a Camera or Other Video SourceEnding an Audio-only Call To hang up from an audio-only call To adjust a camera using the remote control Setting and Using Camera PresetsTo move the camera to a preset To view your near-site presets To store a preset Switching Between Full Screen Video and the Home ScreenTo delete all presets To see the video in the full screen Enabling Dual Monitor Emulation To enable Dual Monitor Emulation To specify when to display the PIP Specifying When to Display the PIPShowing, Moving, and Turning Off the PIP To show, move, or turn off the PIP during a call To adjust the volume Adjusting VolumeControlling What You Hear Muting the Microphone Showing Content from a Computer Showing ContentShowing Content with People+Content IP To install the People+Content IP application on a computer To stop showing content To start showing contentResolution Refresh rates Hz Before the call begins Showing Content from a Document Camera, VCR, or DVD Player To show content with People On Content Showing Content with People On ContentSelect People On Content To stop showing content with People On Content Searching the Directory Working with Directory Entries To add a single-site entry to the directory Adding, Editing, and Deleting Directory EntriesTo add a multiple-site entry to the directory To edit an entry Categorizing Directory EntriesTo delete an entry To create a new group To delete a group Refreshing Global Directory EntriesTo assign an entry to a group To manually refresh global directory entries About Multipoint Calls Including Multiple Sites in CallsPlacing a Multipoint Call Hosted by… Lets you include… Supports these calls… To configure a meeting password Supplying a Password for Bridge CallsTo place a cascaded multipoint call About Multipoint Viewing Modes Setting DescriptionSystems with See this Controlling How the System Answers Multipoint Calls Using Chair Control for Multipoint CallsSelect this… To do this… Hosted by… Allows chair control if… If you You can do this… By selecting… Are… Click Place a CallRelease Chair View Site Changing the Way Calls Are Answered Temporarily Refusing CallsAnswering Calls Automatically To temporarily refuse incoming calls To mute automatically answered calls Muting Automatically Answered Calls Adding and Removing Microsoft LCS Contacts Using Microsoft LCS Features with Video CallsViewing Microsoft LCS Contact Status To add or remove LCS contacts for the Polycom HDX system Hearing Audio Confirmation When You Dial Displaying the Far Site’s Name When the Call ConnectsCustomizing Your Workspace Allowing the Far Site to Control Your Camera To enable audio confirmation Adjusting for Room LightingTo turn backlight compensation on