Introducing your Meridian Digital Telephone
Parts of your Meridian Digital Telephone
Message Waiting Light
The Message Waiting light turns on to indicate that a message has been left for you.
LCD Indicator
A steady 
means the feature or line is active. A flashing 
means the line is on hold or the feature is being programmed.
Meridian Display Option
The Meridian Display Option, with adjustable angle and contrast, shows you features, instructions, and incoming call information. It attaches to the M2008/M2008HF or
M2616D.
Hold
By pressing 
, you can put an active call on hold. Return to the caller by pressing
the extension key beside the flashing 
.
Release Key (Rls)
By pressing | , you can disconnect an ac- tive | |
call. You may also hang up the handset. | is especially | |
useful for disconnecting handsfree calls.
Volume Bar
Use 
to control the volume of the handset and the speaker. Raise the volume by pressing the right side of the bar. Lower it by
pressing the left side.
Feature keys
You access telephone features and telephone lines with the feature keys The keys are labeled for your convenience.
Main Extension key/Primary Directory Number (DN) key
By pressing the lower
Microphone
A microphone is an integral part of the M2616 and M2008HF telephone, allowing you to have a telephone conversation without using the handset (Handsfree calling).
The preceding figure shows the location of the control buttons on your Meridian Digital Telephone. Please refer to the second titled Your Telephone’s Controls, located near the back of this guide, for information on the functions performed by each of these buttons.
4
