Controls and Features (continued)
Remote Control
1
5 [MENU] Button
Press this button to display the menu. Pressing this button when the menu is displayed clears the menu. (☞ Pages 23, 24)
2 | ON | OPERATE | OFF | 8 |
|
|
| ||
3 | FOCUS LIGHT | TEST | 9 | |
| ||||
|
| |||
4 |
|
|
| 10 |
5 | MENU |
| EXIT | |
|
|
| ||
6 |
|
|
| 11 |
| ENTER |
|
| |
7 | PRESET |
| HIDE | 12 |
1 Remote Control’s Signal Transmitter
(☞ Page 17)
2 [OPERATE ON] Button
When this unit is in the standby mode, pressing the button for more than 1 second will turn this unit on and cause the [OPERATE] indicator to light up. (☞ Page 20)
3 [LIGHT] Button
Lights up illumination (light) of the remote control buttons for about 10 seconds.
4 [FOCUS] Button
Use this button to adjust focus of the projected image. Press the button to switch to the image mode for focus adjustment. Adjust focus using the focus ring on this unit.
●Press the [EXIT] button to return to the original image.
6 Cursor [/ //] Buttons
Use these buttons when adjusting the menu items. (☞ Pages 23, 24)
7 [PRESET] Button
Use this button to reset the values to factory settings when the “Gamma”, “Color temp.”, “Mask” or “Picture shift” item in the menu is selected.
8 [OPERATE OFF] Button
When this unit is in operation (projecting), press it for 1 second or more to switch to the cool down mode, which will automatically switch to the standby mode after about 90 seconds. (☞ Page 21)
●The [OPERATE OFF] button will not work within approximately 1 minute after the light source has been turned on. Start operation only after 1 minute’s time.
9 [TEST] Button
Press this when adjusting focus, screen size or picture quality. Press the button to switch to the test pattern image for adjustment.
●Alter the test pattern with the [TEST] button.
●Press the [EXIT] button to return to the original image.
10 [EXIT] Button
Press this button to return to the previous hierarchical menu (for example, to return from submenu to main menu). Pressing this button when the menu is displayed will clear the menu. (☞ Pages 23, 24)
11 [ENTER] Button
Press this button to show the next hierarchical menu (for example, to enter submenu from main menu). It is also used when “ENTER” is displayed against a selection item on the menu screen. (☞ Pages 23, 24)
12 [HIDE] Button
Press this button to temporarily clear the video image. Press again to resume. (☞ Page 21)
12