2 Loosen the screws on the lamp unit and | Handle |
lift up the handle |
|
● Loosen the 2 screws with a screwdriver. |
|
3 Pull out the lamp unit
Lamp Unit
4 Insert the new lamp unit until it is fully in
Caution
Do not touch the glass surface of the lamp directly with your hand or stain it. Touching it with a bare hand may dirty the surface, hence shortening the lamp life, causing marked performance deterioration such as darkened screens, lamp blowout as well as malfunction.
5 Tighten the screws of the lamp unit and close the handle
● Fasten the 2 screws with a screwdriver.
6 Attach the lamp cover and fasten the screws
● Fasten the 2 screws with a screwdriver.
Note
When fitting the lamp cover, insert the left end (with 2 claws) of the lamp cover into the unit, followed by ensuring that the protruding part on the reverse side of the lamp cover fits snugly into the hole of the unit.
As this protrusion acts as a switch, misfitting may lead to failure in turning on the power.
29
