Controls and Features (continued)
Rear Side/Right Side/Bottom Surface
3 4
2
1
Bottom Surface | 5 |
|
1 Connection Panel
Access panel by removing four screws and removing side panel.
2 Lamp Cover
Remove this cover when replacing the lamp. See manual insert for details on accessing bulb.
3 Exhaust Vent
Warm air is expelled through this vent to keep the system cool. Do not block the exhaust vents.
Metal around vent is hot - DO NOT TOUCH while unit is in operation
4 Remote Sensor (Rear)
When operating with the remote control, aim it towards this sensor. (☞ Page 17)
●A remote sensor is also located at the front of the unit.
6 |
6 |
7
Blocked as it is not in use. Opening it forcibly will cause damage to the unit.
5 Front Adjustable Foot (for adjusting height and angle)
It is set at the lowest position when shipped from the factory.
The foot can be adjusted to a maximum angle of +6° and a maximum length of 31 mm. (☞ Page 14)
6 Filter
Cleans air drawn in from the air inlet.
Please clean this filter regularly. (☞ Page 31)
7 Rear Fixed Foot
8