SAFETY PRECAUTIONS
IMPORTANT INFORMATION
NOTICE (For USA)
Language for Manuals of Products using HID Lamps (that contains mercury)
This product has a High Intensity Discharge (HID) lamp that contains a small amount of mercury. It also contains lead in some components.
Disposal of these materials may be regulated in your com- munity due to environmental considerations. For disposal or recycling information please contact your local authori- ties, or the Electronics Industries Alliance: http:// www.eiae.org.
WARNING:
TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
WARNING:
THIS APPARATUS MUST BE EARTHED.
CAUTION:
To reduce the risk of electric shock, do not remove cover. Refer servicing to qualified service personnel.
This projector is equipped with a
FCC INFORMATION (U.S.A. only)
CAUTION:
Changes or modification not approved by JVC could void the user’s authority to operate the equipment.
NOTE:
This equipment has been tested and found to comply with the limits for Class B digital devices, pursuant to Part 15 of the FCC Rules. These limits are designed to provide rea- sonable protection against harmful interference in a resi- dential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harm- ful interference to radio communications. However, there is no guarantee that interference will not occur in a par- ticular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encourage to try to correct the interference by one or more of the following measures:
•Reorient or relocate the receiving antenna.
•Increase the separation between the equipment and re- ceiver.
•Connect the equipment into an outlet on a circuit differ- ent from that to which the receiver is connected.
•Consult the dealer or an experienced radio/TV techni- cian for help.
MACHINE NOISE INFORMATION (Germany only)
Changes Machine Noise Information Ordinance 3. GSGV, January 18, 1991: The sound pressure level at the operator position is equal or less than 70 dB (A) according to ISO 7779.
About burning-in of the D-ILA device
Do not allow the same still picture to be projected for a long time or an abnormally bright video picture to be projected. Do not project video images with
on a screen. The video image could be burnt into the
Use special care when projecting video games or computer program images. There is no problem with ordinary
About the installation place
Do not install the projector in a place that cannot support its weight securely.
If the installation place is not sturdy enough, the projector could fall or overturn, possibly causing personal injury.
IMPORTANT SAFEGUARDS
Electrical energy can perform many useful functions. This unit has been engineered and manufactured to assure your per- sonal safety. But IMPROPER USE CAN RESULT IN POTEN- TIAL ELECTRICAL SHOCK OR FIRE HAZARD. In order not to defeat the safeguards incorporated into this product, ob- serve the following basic rules for its installation, use and ser- vice. Please read these Important Safeguards carefully be- fore use.
–All the safety and operating instructions should be read be- fore the product is operated.
–The safety and operating instructions should be retained for future reference.
–All warnings on the product and in the operating instruc- tions should be adhered to.
–All operating instructions should be followed.
–Place the projector near a wall outlet where the plug can be easily unplugged.
–Unplug this product from the wall outlet before cleaning. Do not use liquid cleaners or aerosol cleaners. Use a damp cloth for cleaning.
–Do not use attachments not recommended by the product manufacturer as they may be hazardous.
–Do not use this product near water. Do not use immediately after moving from a low temperature to high temperature, as this causes condensation, which may result in fire, elec- tric shock, or other hazards.
–Do not place this product on an unstable cart, stand, or table. The product may fall, causing serious injury to a child or adult, and serious damage to the product. The product should be mounted according to the manufacturer’s instruc- tions, and should use a mount recom-
mended by the manufacturer.
– When the product is used on a cart, care should be taken to avoid quick stops, ex- cessive force, and uneven surfaces which may cause the product and cart to over- turn, damaging equipment or causing pos- sible injury to the operator.
2
