Controls and Features
Front Side/Top Surface/Left Side
1 Backup Control Panel
Use in case IR remote cannot be used.
Panel is located behind metal plate.
2 AC Power Input Terminal
This is the AC power input terminal. Connect the supplied power cord to this terminal. (☞ Page 19)
3 Foot Lever (for front adjustable foot)
Use when extending or retracting the front adjustable foot. (☞ Page 14)
4 Lens
This is a 1.3 x manual zoom lens. Before projection, remove the lens cap. (☞ Pages 16, 19)
6 Remote Sensor (Front)
When operating with the remote control, aim it towards this sensor. (☞ Page 17)
•A remote sensor is also located on the rear of the unit.
7 Focus Ring
Turn manually to focus the projected image.
(☞ Page 20) Remove metal cover to access lens.
8 Zoom Ring
Turn manually to zoom the projected image.
(☞ Page 20) Remove metal cover to access lens.
5 Air Inlets (3 locations: front, right, bottom of unit)
The air inlets absorb air to cool the interior of the unit. Do not block or allow warm air to blow into them. This may lead to malfunction of the unit.
•The air inlet filter on the right side cannot be removed. Please clean this filter regularly with, for example,
a vacuum cleaner.
7
