Metz 28 C-2 operating instructions Loading and changing batteries, Exchanging batteries

2. Preparing the flashgun for use

Fig. 2: Exchanging batteries

2.2 Loading and changing batteries

• Switch off the flashgun with the O switch.

k• Push the battery compartment cover in the direction of the arrow.

•Load the dry-cell or NiCad batteries lengthwise in conformity with the indicated battery symbols.

Ensure correct polarity when loading batte- ries. Always exchange all 4 batteries. All batteries should have approximately the same charge.

•Reclose the battery compartment cover after the batteries have been loaded.

☞Spent batteries must not be thrown into the dustbin! Contribute to the protection of the

environment and discard spent batteries at the appropriate disposal points!

24