Metz 28 C-2 Care and maintenance, Optional extras, Forming the flash capacitor

10. Care and maintenance

Remove dust and grime with a soft dry cloth, or a sili- cone-treated cloth. Do not use detergents as these may damage the plastic parts.

Forming the flash capacitor

The flash capacitor incorporated in the flashgun undergoes a physical change when the flashgun is not switched on for prolonged periods. For this reason it is necessary to switch on the flashgun for approx. 10 minutes every 3 months. The battery

kmust supply sufficient power to light up the flash- ready light within one minute after the flashgun was

switched on.

11. Optional extras

Malfunctions and damage caused to the meca- blitz due to the use of accessories from other manufacturers are not covered by our gua- rantee!

•B 28 battery charger (Order No. 000100280) To charge NiCad batteries, type IEC KR 15/51

•Mecalux 11 (Order No. 000000112)

Highly sensitive light slave for delay-free remote firing of slave flashguns by a camera-triggered flash. Responds also to infrared light. Does not require batteries.

•Mecalux Holder 60-26 (Order No. 000060264) To mount the Mecalux 11.

•Bounce diffuser 28-23 (Order No. 000028237)

•Bag T33 (Order No. 000006331)

38