GALILEO 616 USER GUIDE
45
Create New Snapshot
At the top of the Snapshot Library list is “Create New Snapshot”. After creating the desired
configuration within the Summing Matrix, Input and Output Processing, Link Groups, and so
on, highlight and press the Enter button to open the naming window and create a name for the
new Snapshot. Press the Menu button when complete, and the newly named Snapshot will be
added to the bottom of the Snapshot Library list and become current.
NOTE: Within the Snapshot page in Galileo 616, a particular Snapshot can be
designated as the “boot snapshot”, so that whenever the unit is turned on it will
open with those system settings and parameters active. Highlight the desired Snap-
shot from the list of those that have been created, highlight the “Is Boot” field, and
press the Enter button or the Blue knob to set it to “Yes.”
INPUT PROCESSING
Select Input Processing from the Galileo Map page, which leads to an Overview page listing
all of the inputs and their labels, and the mute status and input level setting of each. Scroll
through and highlight the inputs using the Up and Down arrows, and press the Enter button to
select and go to the parameters page for that input. An alternate route to the Input Processing
parameters for a channel is via the Input Masters page, using the same procedure.
Input Processing Overview page