GALILEO 616 USER GUIDE
47
■Label: Pressing the Enter button will open the naming utility; create the desired label and
press the Menu button to accept.
■Mute: Highlight this field and press the Enter button or press/turn the Blue knob to toggle
between mute and unmute for the channel; when muted, the word “mute” is highlighted.
■Gain: Highlight the field, and use the Red knob to adjust gain in the range of –60 dB to
+10 dB (nominally at 0 dB); press and turn the knob to scroll quickly through the gain val-
ues.
■Delay: Highlight the field, and turn the Red knob clockwise to adjust the delay from the
nominal zero point, and counterclockwise to reduce the value if it is above zero. Press the
knob and turn for a coarser adjustment, and to reach higher values more quickly.
■Delay Units: To change the delay units, highlight and toggle through the choices with the
Enter button or press or turn the Blue knob. The Blue knob scrolls from milliseconds coun-
terclockwise to samples clockwise.
OUTPUT PROCESSINGSelect Output Processing from the Galileo Map page, which leads to an Overview page listing
all of the outputs and their labels, and the mute status and output level setting of each. Scroll
through and highlight the outputs using the Up and Down arrows, and press the Enter button
to select and go to the parameters page for that output. An alternate route to the Output Pro-
cessing parameters for a channel is via the Output Masters page, using the same procedure.
Output Processing Overview page