GALILEO 616 USER GUIDE
59
USING PARAMETRIC EQ
When Parametric EQ is selected in the Input or Output Processing pages, all available EQ
points are presented on the page — five for inputs and 10 for outputs. Choose the particular
parametric EQ point to change using the Left and Right arrows; the selected one will blink.
Once a Parametric EQ point is selected, use the knobs to adjust the parameters, as follows;
the knobs behave the same as a single band of the Meyer Sound analog CP-10 parametric
equalizer:
■Blue Knob: Moves the frequency center for each point; the value is shown in the “f=X.X”
field on the top left.
■Green Knob: Adjusts the bandwidth of the parametric EQ point; turn clockwise to narrow
and counterclockwise to widen between 0.10 and 2.00; the value is shown in the
“bw=X.XX” field on the top center.
Parametric EQ with EQ Points
Parametric EQ with Equalization Changes