CHAPTER 4: USING THE GALILEO FRONT PANEL
48
In the Overview page, pressing the Blue knob will reverse the polarity of the highlighted chan-
nel; the word “pol” will be highlighted when the polarity is reversed for that output channel.
Pressing the Green knob will mute and unmute the highlighted channel; the word “mute” will
be highlighted when that output channel is muted. Turning the Red knob will affect the gain of
the highlighted channel, clockwise for gain and counterclockwise for attenuation; pressing
and holding the Red knob will make coarser gain adjustments.
Within the channel’s Output Processing page, the available parameters are:
■Parametric: Press or turn the Blue knob to select Enabled or Bypassed for that channel’s
parametric EQ section; press the Enter button to enter the Edit page for the parametric
equalizer and make changes.
■TruShaping: Press or turn the Blue knob to select Enabled or Bypassed for that channel’s
TruShaping EQ section; press the Enter button to enter the Edit page for the TruShaping
equalizer and make changes.
■High/Low Pass: Press or turn the Blue knob to select Enabled or Bypassed for that chan-
nel’s High/Low Pass EQ section; press the Enter button to enter the Edit page for the High/
Low Pass equalizer and make changes.
■Type : Press the Enter button or press/turn the Blue knob to go between Low Pass, High
Pass, and High Pass Elliptical; pressing scrolls through continually or turning the blue knob
goes from low pass counterclockwise to the high passes clockwise.
■All EQ: Press or turn the Blue knob to select Enabled or Bypassed for that channel’s total
equalization. Press the Enter button to enter the existing equalization curve with a cursor
nominally placed at 1 kHz; turning the Blue knob will scroll through the EQ curve and the
values at the cursor point will be shown at the top of the screen and pressing the knob
Output Processing Parameters