CHAPTER 4: USING THE GALILEO FRONT PANEL
54
■Reset Parametric: Resets the values of all of the parametric EQ points to zero on the
present channel’s page, and can be used in any of the EQ pages.
■Reset TruShaping: Resets the values of all of the TruShaping EQ points to zero on the
present channel’s page, and can be used in any of the EQ pages.
CAUTION: The Reset Parametric and Reset TruShaping commands are not tog-
gles, so the settings will be lost for that channel. For temporarily removing the
effect of either of these equalization values from the input or output channel, use the
Bypass controls in the Settings menu of the EQ graph page, or the Enabled/Bypassed
fields in the Input Processing or Output Processing pages.
■TruShaping to LD-2: This special setting of the TruShaping EQ is used when multiple
MSL-4 loudspeakers are arrayed and driven by the particular output channel of Galileo.
Equalization View Menu
Use the Up and Down arrows, and press the Enter button to select from the following sub-
menu items:
■Phase: Shows the phase response of the EQ curve along with the frequency response.
■Shading: Shows the EQ curve with shading from center line to curve (default setting).
■Numeric: Shows the values table for each equalization point within the current channel’s
Parametric, TruShaping, or High/Low Pass EQ page, in the place of the EQ graph.
Equalization Edit Menu
!