3. Operation

3.4 Personalisation (optional)

Function

Personalisation parameters can be set and modified using the UPS Driver software installed on a computer that is connected to the UPS (see section 2.5 Connection to the RS232 communications port).

Check that the RS232 26 communications cable is connected.

UPS Driver installation:

1 - Insert the Solution-Pac CD-ROM containing the UPS Driver software in the drive of a PC running Windows. 2 - Open the Windows File manager or Explorer and select the CD-ROM drive.

3 - Double-click "\Emb\Evolutio\Config\Setup.exe".

Once UPS Driver has been installed, UPS parameters can be modified in a window containing a number of tabs, each presenting a set of parameters :

ON / OFF conditions tab

Configurable functionDefault settingOptions

 

 

 

Automatic restart

Enabled

Disabled

 

 

 

Cold start

Enabled

Disabled

 

 

 

Forced reboot

Enabled

Disabled

 

 

 

Energy saving

Disabled

Enabled

 

 

 

UPS ON / OFF via software

Enabled

Disabled

 

 

 

Battery tab

Configurable function

Default setting

Options

 

 

 

 

 

Every day

Interval between automatic battery tests

Once a week

Once a month

 

 

No test

 

 

 

Low-battery warning threshold

20% of the remaining battery

10 to 40% of the remaining battery

 

backup time

backup time

 

 

 

Configuration of additional battery modules

Display the number of standard

Back-up time for non-standard

 

EXB modules connected

batteries (for 3000XL only)

 

to the UPS

 

 

 

 

Protection against deep discharges

Enabled

Disabled

 

 

 

Page 18 - 34007115EN/AA