Microtek MiniLink manual WEM Specifications

WEM SPECIFICATIONS

RF Modules

RF SECTION

Power Output	1 W EIRP @ 5.3 GHz (maximum)
	50 W EIRP @ 5.8 GHz (maximum)
Transmitting Frequency	5.250 – 5.350 GHz (U-NII-2)
	5.725 – 5.825 GHz (U-NII-3 / ISM)
Channel Capacity	8 non-overlapping channels
	5.3 GHz Band - 5280, 5300, 5320
	5.8 GHz Band - 5745, 5765, 5785, 5805, 5825
Modulation	OFDM
Latency	<10 milliseconds
Sensitivity	-82 dBm for maximum data rate
Polarization	Linear, vertical only
Antenna Type & Gain	Omni, 2.5 dBi
	Small patch, 7.5 dBi @ 5.3 GHz , 7.8 dBi @ 5.8 GHz
	6x6 patch, 12.2 dBi @ 5.3 GHz, 16.7 dBi @ 5.8 GHz
	Small patch in 18” dish, 24 dBi @ 5.8 GHz
Beam Width	Omni-360°, Small patch-90°, 6x6 patch-24° & 18” dish-8°
Data Throughput Rate	Up to 20 Mbps - standard mode, 50+ Mbps – Super mode
	(3 channels maximum)
FCC ID	JRRWES
Industry Canada	4887A-WES
MANAGEMENT
Interface	10/100 Base T, half/full duplex, rate auto negotiated (802.3
	compliant)
Frequency Selection	Rotary switch – channels 0 – 9
Web Browser Interface	User ID/Password, Super Mode, IP Address, WPA2 AES
	and WEP Encryption
Access Method	Time division duplexing/Time division multiple access
	(TTD/TDMA)
Protocols Used	IPV4, UDP, TCP, ICMP, Telnet, HTTP, FTP, SNMP
MECHANICAL	Network Management HTTP
Physical	Environmental, sealed, billet aluminum, powder coated
	housing with UV stabilized PVC radome
Dimensions	3.6” x 3.6” x 1.75”
Weight	15.2 oz
POWER
Power Requirements	12 - 20 VDC @ 3 W (Reverse voltage protected)
Power Method	Power-over-Ethernet (PoE) via power injector module
	(“mid-span” compliant – pins 4,5 positive – pins 7,8 ground)
Connector	RJ45 – in and out of power injection box
Cable Specifications	100 Meters (328 Feet) on 24 AWG CAT-5 cable
ENVIRONMENTAL
Humidity	95% non-condensing
Operating Temperature	-20F to +150F
	- 18 -