WEB PAGES (cont’d)
B.INFORMATION
1.POINT-TO-POINT HOST AP WEM
The information page provides the details of how the
Access Point Name: | In most cases, the Access Point, or Host, is the receiving unit |
Bridge Name: | The subscriber or client unit is the transmitting device |
MAC Address: | Individual Ethernet device identification code |
Firmware Version: | The latest firmware version is 6.4.0P (7.01) |
Current Channel: | Refer to “Rotary Switch Position” for actual frequency channel |
Turbo Mode: | 0= default (off), 1 or 2= on, both units must be on channel 3,6 or 8 to turn turbo mode on |
Rotary Switch Pos: | Indicates what channel the software has determined that has been enabled |
25.5dBi Jumper: | “On” for: |
17.7dBi Jumper: | “On” for: |
Security: | WPA AES 128 bit is standard default, WEP can also be enabled |
IP address: | Shows the IP address of the connected WEM and can be changed as desired |
- 10 -
