CA certificate
EAPTLS
RADIUS user name
CA certificate
Signed certificate
EAPTTLS
Appropriate inner authentication
RADIUS user name
RADIUS password
CA certificate

Configuring 802.1X Authentication

The information to complete is dependent on the 802.1X se curity mechanism you select. Some require user names,
passwords, and/or certificates. If your network contains mu ltiple access points with different modes of au thentication,
then you can select and configure more than one authentication mechanism.
1From the Configure 802.1X Authentication dialog, select an authentication mechanism.
If you have selected Do this
EAPMD5, LEAP, or
MSCHAPv2
Proceed to the next step.
PEAP or EAPTTLS Click Install CA Certificate, and then type the path to the CA certificate, or click Browse to
locate the certificate file.
EAPTLS aClick Install Signed Certificate, and then type the path to the signed certificate, or click
Browse to locate the certificate file.
bClick Install CA Certificate, and then type the path to the CA certificate, or click Brows e
to locate the certificate file.
2Type the necessary information that the authentication server requires.
3Click OK, and then follow the instructions on the computer screen.
Installing the printer on an Ethernet network

Information you will need to set up the printer on an Ethernet network

Make sure you have the following information before you begin:
A valid, unique IP address for the printer to use
The gateway for the network
The network mask of the network where the printer will be used
The name of the domain where the printer will reside
Networking 104