3To confirm the setting, press the left or right arrow button to scroll to Yes, and then press .
Installation screen did not appear during installation
If the "Before you troubleshoot" checklist does not solve the problem, then try the following:
LAUNCH THE PRINTER CD MANUALLY
For Windows users
1Click , or click Start and then click Run.
2In the Start Search or Run box, type D:\setup.exe , where D is the letter of your CD or DVD drive.
3Press Enter, or click OK.
4Click Install, and then follow the instructions on the computer screen.
For Macintosh users
1From the Finder desktop, click the CD icon.
2Double-click the software installer package, and then follow the instructions on the computer s creen.
Software did not install
If you encountered problems while installing, or if your printer does not appear in the list in the printers folder or as a
printer option when sending a print job, then try uninstalling and reinstalling the so ftware.
Before you reinstall the software, do the following:
MAKE SURE THAT YOUR COMPUTER MEETS THE MINIMUM SYSTEM REQUIREMENTS
TEMPORARILY DISABLE SECURITY PROGRAMS IN WINDOWS BEFORE INSTALLING THE SOFTWARE
CHECK THE USB CONNECTION
1Check the USB cable for any obvious damage. If the cable is damaged, then use a new one.
2Firmly plug the square end of the USB cable into the back of the printer .
3Firmly plug the rectangular end of the USB cable into the USB port of the computer.
The USB port is marked with .
Note: If you continue to have problems, then try another USB port on the c omputer. You may have connected to a
defective port.
RECONNECT THE PRINTER POWER SUPPLY
1Turn off the printer.
Note: Make sure the printer is not in Sleep mode. Press and hold for three seconds to turn off the printer.
2Unplug the power cord from the wall outlet, and then pull out t he power cord from the power supply.
Troubleshooting 129