SECTION 2
INSTALLATION
SECTION 2
INSTALLATION
I. UNLOADING/UNPACKING
Your Middleby Marshall Ovens are shipped partially assembled. Each oven section will arrive in its own crate of the following size and weight:
| PS360U/PS360L | |
Length: | 72” (183cm) | 66” (167cm) |
Width: | 48” (122cm) | 57” (144cm) |
Height: | 60” (152cm) | 50” (127cm) |
Weight: | 1675 lbs. (760kg) | 1750 lbs. (780kg) |
If you ordered stands for your ovens, they are shipped in separate crates.
When your common carrier or truck line notifies you of delivery, you must have a forklift at the facility to unload the crate(s).
If you have a door that is wider than the ovens, simply move the ovens into your facility and set up an appointment with your Middleby Marshall Authorized Installer.
NOTE: The width of each oven can be reduced by about 1" (25mm) by removing the window from the oven. Window disassembly instructions are in the Cleaning section of this Owners Manual.
If the ovens are wider than your door opening, the oven will have to be dismantled according to the directions in the Pre- Installation Procedures Manual.
NOTE
There must be adequate clearance
between the oven and combustible con- struction. Clearance must also be pro- vided for servicing and for
operation.
WARNING
Do not obstruct the flow of combustion
and ventilation air to and from your oven. There must be no obstructions around or underneath the oven.
WARNING
This oven must be installed in accordance with the rules in force. Use only in a
well ventilated area. Read the
instructions before use.
