SECTION 4

MAINTENANCE

4.  Replace the air fingers by pushing in at the back side. Remember to replace them according to the numbers marked on them when they were removed. They must go back in the same way they came out.

IMPORTANT: When inserting fingers the tab on the outer plate must be in the groove as shown in Figure 4-18. There is a blocking tab on the outside of the groove which will prevent inserting the finger in the groove if the outer plate is moved away from the flange of the finger manifold.

Figure 4-16.

Extended Lip

Tab on

Outer Plate

Flange of

Finger Manifold

Tab on

Outer Plate

Figure 4-17.

29

Page 33
Image 33
Middleby Marshall PS528E, PS528 (Double), PS528 (Triple) Extended Lip Tab on Outer Plate Flange Finger Manifold