Syn-Tech III P25 Portable Radio
OPERATION MANUAL
4.2.3.2Receiving Acknowledged Individual Calls
When an acknowledged individual call request is received, you may accept or reject the call. The initiating radio will receive the accepted or rejected response. If the call is unanswered the display will show the missed call.
If the call is accepted the radio will enter individual call mode and use the received source ID as the destination ID in individual call replies.
Press
ACCEPT to
enter
individual call mode
Individual
call time out
(after ten seconds)
Figure 4.34 – Receiving acknowledged individual call
Figure 4.35 – Missed individual call
If no signal is received and PTT is not pressed for ten seconds, individual call mode will time out.
36 | |
Version 5.0 | http://www.midlandradio.com |
|
