Syn-Tech III P25 Portable Radio
OPERATION MANUAL
4.1.7Selecting Digital Talk Group
The default talk group may be set for the channel in radio programming. When the channel is selected, the default talk group is used. If a default talk group has not be set for the channel, the radio will use the talk group last selected and displayed.
Each zone in the radio may have a list of allowed talk groups. When the radio is in digital transmit mode, you may select a new talk group from this list by repeatedly
pressing the 
(star) key until “GROUP:” is displayed. Then use the
entered talk group is not in the zone’s talk group list, the radio will not allow the talk group selection.
Each zone in the radio may have all valid talk groups assigned to it. This allows any talk
group to be selected by repeatedly pressing the 
(star) key until “GROUP:” is displayed. Then use the
The radio has a talk group scan feature which is on by default. When a signal is received from any talkgroup in the list, the radio will switch to the received talkgroup for the duration of the receive signal and then start the scan delay timer. You may reply using the received talk group during the scan delay time, by pressing PTT. After the scan delay time expires the radio will switch back to the selected talk group. Use MENU CHANNEL PARAMETERS GROUP SCAN to turn talk group scan on/off.
22 | |
Version 5.0 | http://www.midlandradio.com |
|
