Cleaning and care
^Carefully pull the brew unit out of the coffee machine.
If you cannot remove the brew unit or can only do so with difficulty, the brew unit is not in the correct position (see "Frequently asked questions").
When the brew unit has been pulled out, do not alter the position of the brew unit handle.
This would displace the brew unit and it would not fit back into the coffee machine.
^Clean the brew unit by hand while running it under hot water. Do not use soap.
^Rub any coffee residue from the filters. One filter is located inside the funnel, the other to the left of the funnel.
^Dry the funnel to prevent ground coffee sticking to it during the next coffee preparation.
^Clean the inside of the coffee machine. Use your vacuum cleaner to remove dry coffee grounds.
To replace the brew unit, repeat the previous steps in the reverse order:
^Push the brew unit back into the coffee machine, making sure it is straight.
^Push the button on the bottom of the brew unit handle a and turn the handle to the right b.
^Close the door.
55
