Cleaning clogged milk pipework

If the quality of the milk froth is unsatisfactory, the air intake hose may be clogged. Follow the instructions in "Step 2: Clean air intake hose and angled section in the door".

If no milk comes out of the main dispenser, only steam, please follow the instructions in Step 1 through 4.

First check if the milk in the milk container has spoiled. This can clog the milk lines.

To clean the clogged milk lines, take a step-by-step approach. Afterwards, check if the milk and/or milk froth preparation and quality are satisfactory.

If the milk and/or milk froth preparation and quality are still not satisfactory, repeat all the steps described without preparing beverages in between.

Step 1: Cleaning the milk pipework in the milk container lid

^Pull the milk intake pipe a out of the milk container lid.

Make sure you also remove the gasket b.

^Clean both under running water. Insert the supplied cleaning brush into the stainless steel pipe and move it back and forth until all milk residue has been removed.

^Use the cleaning brush to clean the milk pipework in the lid as well.

68

Page 68
Image 68
Miele 9741510 Cleaning clogged milk pipework, Cleaning the milk pipework in the milk container lid