|
| Frequently asked questions | |
|
|
|
|
|
|
|
|
Fault | Possible cause and solution | ||
|
|
|
|
Fault 73 | ^ The brew unit cannot reset to the correct position or it is | ||
or |
| clogged and the ground coffee cannot be processed. | |
"Check the brew unit" | ^ Check if you can remove the brew unit (see "Cleaning | ||
|
| and care – Brew unit"). | |
| ^ If you can remove the brew unit, clean it (see "Cleaning | ||
|
| and care – Brew unit"). | |
|
|
|
|
|
|
|
|
Push the coffee ejector of the brew unit into the correct position (see image).
^Reinsert the waste unit and the water container. Do not insert the brew unit. Close the door and turn off the coffee machine using the On/Off button .
The brew unit motor will automatically move to the correct position.
^When the message "Insert the brew unit" is displayed, open the door and reinsert all parts into the unit.
If you cannot remove the brew unit:
^Turn off the coffee machine using the On/Off button . Wait about 2 minutes and then turn it on again.
61
