Miele CVA 6431 (C) Changing the portion sizes, Changing the portion size while making a drink

Models: CVA 6431 (C)

1 76
Download 76 pages 11.59 Kb
Page 32
Image 32
Changing the portion sizes

Changing the portion sizes

The flavour of the coffee produced depends on the type of coffee, how finely the beans are ground and the quantity of water used. You can programme the amount of water used for each portion of espresso, coffee or hot water to suit your taste and your cups.

A newly saved portion size applies to the currently selected drink type. It is not distinguished by coffee type or chamber.

There is a maximum amount which can be programmed for each type of drink. Preparation stops when this is reached. The maximum amount possible for that type of drink will then be saved.

The changed portion size is always saved in the current profile. The name of the current profile is shown in the top left of the display.

There are two ways of programming the portion size, either:

with the drinks sensor while making a coffee, or

by selecting "Portion size" in the Settings menu.

If there is insufficient water in the water container, the process will be stopped and the amount will not be saved.

Changing the portion size while making a drink

Touch the ￿, ￿ and ￿ sensors for at least 3 seconds to start portion size programming.

^Place the desired cup under the central spout.

^Touch the sensor for the drink you want until "Change" appears in the display.

The desired drink will be prepared and "Save" will appear in the display.

^Touch the OK sensor when the cup has been filled to the level you want.

The portion size you have saved will now be dispensed every time that particular drink is selected.

Tip: You can cancel the portion size programming as long as "Stop" is visible in the display.

32

Page 32
Image 32
Miele CVA 6431 (C) installation instructions Changing the portion sizes, Changing the portion size while making a drink