| Problem solving guide |
|
|
|
|
Message | Possible cause and remedy |
|
|
Fault 75 | The sensors which recognise the waste container are dirty. |
| ^ Remove the waste container and clean the interior where it |
| is located. Ensure that the space to the top right and left is |
| clean. |
| ^ Push the waste container into the machine as far as it will |
| go. Close the front. |
The coffee capsule was not pushed onto the capsule plate.
^Open the machine front and remove the capsule carousel and carousel runners.
^Clean the area under the carousel runners. It is particularly important to clean the sensor which is used to recognise the capsule chambers as well as the recess in the floor. Dry everything with a soft cloth.
^Replace all parts and close the machine front.
The coffee capsule was not pushed onto the capsule plate correctly and could have been damaged.
^Open the machine front and remove the capsule carousel and carousel runners.
^There is an opening to the right of the slot for the capsule plate. Check whether a coffee capsule is lying on top of the capsule plate.
61
