Cleaning and care
Changing a halogen lamp
Pull out the deflector plate, and remove the grease filter as described earlier.
Switch off the fan and the lighting.
Exercise caution when changing halogen lamps. They get very hot during use, and remain hot for some time after being switched off. Do not touch the surface directly when changing a lamp, as grease particles from your fingers will adhere to the surface and damage it. Please follow the manufacturer’s instructions.
Remove the charcoal filter if the cooker hood is being used in recirculation mode.
Before any cleaning or maintenance work, disconnect the cooker hood from the mains supply. Ensure that
–it is switched off at the wall socket and the plug is withdrawn, or
–the fuse is withdrawn from the fused spur connection unit, or
–the mains fuse is withdrawn,or
–the
Push down the lighting unit slightly via the opening in the safety panel.
The halogen lamp is now accessible to be unscrewed
Replace it with a new halogen lamp (specification: GU/GZ 10, 230 V, 50 W). Screw the lamp into the socket and push it upwards.
We recommend only using lamps of the same specification and also made by the same manufacturer as the ones being replaced.
Replace the grease filter and, if being used in recirculation mode, the charcoal filter.
19
