![](/images/new-backgrounds/65401/6540153x1.webp)
Installation
When fitting a DA 3190 into a 60 cm housing unit, unscrew the brackets on the deflector plate whilst it is pulled out.
Lift the appliance up into the housing from below, and engage in the brackets.
Note for dismantling the cooker hood: Undoing the screws on the left and right inside the housing releases the brackets, allowing the appliance to be removed from the unit.
Push the cooker hood back against the spacer strip.
Pull out the deflector plate.
Secure the appliance to the brackets using 2 screws on each side.
Remove the protective film between the deflector plate and the casing.
27