Installation
2 hose clips
for securing the vent ducting to the exhaust socket.
1 non-return flap
for fitting into the exhaust socket on the motor unit (only for air extraction mode).
Depending on model, the
2 brackets
to support the appliance in the wall unit.
1 spacer strip
to conceal the gap between the rear of the appliance and the wall.
Conversion kit for recirculation mode
including exhaust grille and flexible aluminium hose (the conversion kit is not supplied with the cooker hood but is available as an optional accessory; see "Technical data").
DML 300 installation kit (optional accessory)
contains hinging and screws for fixing a lightshield to match kitchen furniture (lightshield not supplied with cooker hood)
8 screws 3.5 x 16 mm
for securing the cooker hood into the wall unit.
8 screws M4 x 12 mm
for securing the cooker hood to the brackets.
4 of the screws can be used instead of the plastic rivets to secure the spacer strip.
2 screws 4 x 30 mm
for securing the cooker hood at rear wall.
4 plastic rivets
for securing the spacer strip to the back of the appliance.
23
