Select Night or 24 Hour Mode

indoor and outdoor

Wireless Motion Sensor

Installing Indoor Motion Sensor Using Optional

Mounting Bracket

Indoor Wireless Motion Sensor

Outdoor Wireless

Motion Sensor

Features:

•No wiring required.

•Up to 30 feet sensing range, 150° Coverage (Indoor).

•Up to 70 feet sensing range, 180° Coverage (Outdoor).

•Adjustable sensitivity.

•Day/Night or Night only operation.

•Test mode.

•Uses 2 AA batteries.

•Can be mounted directly to wall or with mounting bracket (included) (Indoor).

•Wall or eave mount (Outdoor).

•Controls receivers up to 100 feet away.

Note: Mount the indoor motion sensor so that it can be angled up or down to give you the desired coverage above the floor level.

1.Attach ball mounting bracket to rear of motion sensor. The ball mounting bracket is designed to mount to the rear of the sensor in three possible directions depending upon the installation requirements. To attach the ball mounting bracket, follow the steps shown below:

•Determine the best mounting position of the sensor for the coverage desired.

•Determine the best location of the wall mounting bracket.

•Insert the tabs on the ball mounting bracket into the tab slots on the rear of the sensor that best align the sensor with the wall mounting bracket.

•Remove the batteries.

•Using a philips-head screwdriver, insert mounting screw into the hole in the battery compartment that aligns with the hole on the rear of the ball mounting bracket. Tighten securely.

These sensors are able to detect motion day and night or night only. To set the detection mode, remove battery compartment

Ball Mounting

Rear of Sensor

cover by sliding the cover down. Remove batteries if necessary. Slide the DETECT switch to either the DAY/NIGHT or NIGHT ONLY position. Replace battery compartment cover by reversing the above instructions.

Installing Batteries

•Before mounting outdoor motion sensor, remove battery compart- ment cover by sliding the cover down.

•For indoor motion sensor, install batteries after sensor is in- stalled.

Install 2 AA batteries according to polarity markings inside the battery compartment. Replace battery compartment cover by reversing the above instructions.

Bracket Screw

Tab Slots

Tab

Swivel

Ball Mounting Ball

BracketMount

Detect

Control

DAY NIGHT

NIGHT ONLY



1 2 3 4		DETECT
CODES

CODE	DETECT		ON-TIME RANGE
			(MINUTES)
	DAY	NIGHT	5 1 TEST
1 2 3 4 NIGHT		ONLY	MIN	MAX

Attaching Ball Mounting Bracket to Indoor Motion Sensor

(Vertical Installation Shown)

2.	Place sensor mounting bracket against surface to be mounted
	on and mark hole locations with pencil or center punch.
3.	Using a 2.5 mm (0.1”) drill bit, drill two pilot holes for mounting
	screws. If not mounting directly to wood or wood stud, drill 5 mm
	(0.2”) pilot holes and use the included wall anchors.
4.	Attach indoor motion sensor mounting bracket to a sturdy object
	(i.e. wall,ceiling,post, etc.) usingtwo screwsprovided.Make sure
	unit has an unobstructed view. Note: Attach mounting bracket

Outdoor Motion Sensor	Indoor Motion Sensor
(Rear View)	(Front View)

Battery Compartment

vertically if connecting to a curved surface such as a post.

5. Install motion sensor to mounting bracket. Using a Philips-head

screwdriver, loosen the clamp screw on the mounting bracket.

Insert swivel ball mount on sensor into mounting bracket socket

598-1116-10

598-1116-10 specifications

The Heath Zenith 598-1116-10 is an advanced motion-sensing outdoor light designed to enhance security and functionality around homes and businesses. This fixture is engineered with the latest technologies to provide reliable performance while ensuring energy efficiency and ease of use.

One of the main features of the 598-1116-10 is its state-of-the-art motion sensor. The device employs a passive infrared (PIR) technology that detects movement within a significant range, ensuring that any motion in its monitored area triggers the light. The sensor is adjustable, allowing users to customize the detection range and sensitivity to suit their specific environment. This adaptability is crucial for minimizing false alarms from unwarranted movements, such as passing cars or animals.

In addition to its motion-detection capabilities, the Heath Zenith 598-1116-10 offers various lighting options. The fixture is equipped with a powerful LED light source that produces a bright output while consuming less energy than traditional incandescent bulbs. This not only aids in lowering electricity costs but also contributes to a longer lifespan for the light, reducing the frequency and hassle of bulb replacements.

The design of the 598-1116-10 reflects both aesthetic appeal and functional robustness. The weather-resistant construction ensures that the light can withstand various climatic conditions, making it suitable for installation in different outdoor environments. The sleek and modern design complements a wide range of architectural styles, enhancing the property’s overall curb appeal.

Another important characteristic of this outdoor security light is its convenient operating features. The device includes a manual override option, allowing homeowners to keep the light on continuously for extended periods when needed, such as during gatherings or outdoor events. Additionally, the light can be set to operate on a timer, providing flexibility and control over illumination schedules.

In conclusion, the Heath Zenith 598-1116-10 stands out in the outdoor lighting market due to its motion-sensing technology, energy-efficient LED lighting, durable design, and user-friendly features. It serves not only as a means of illumination but also as a crucial security element, helping to deter potential intruders while offering peace of mind for property owners. This combination of practicality and style makes the 598-1116-10 a top choice for those looking to enhance their outdoor lighting system.

Heath Zenith 598-1116-10 Indoor and outdoor Wireless Motion Sensor, Select Night or 24 Hour Mode

Models: 598-1116-10

indoor and outdoor

Wireless Motion Sensor