Miele DA 3160, DA 3190 Set up for recirculation mode, Electrical connection, Installation

		Installation
Set up for recirculation mode	143
If site conditions are not suitable for the		319
cooker hood to be used with air
	10
extraction, the appliance must be set
up for recirculation.
For this, a conversion kit DUU 151,
available from your Miele dealer or the	240
Miele Spare Parts Dept., is required.
		110
	90	223
			40
		33	160
	150
￿ The non-return flap is not needed for
the recirculation mode. Depending
on model, it may already be fitted.
Pull the non-return flap off the bracket
from vent connection.

You will also need a charcoal filter (see	￿ Fit the conversion kit as described in
“Technical data”).	the installation instructions supplied
	with the kit.

￿ Make sure that the slats on the exhaust grille are directed towards the middle of the room, and not towards the wall or the ceiling.

￿ Fit the charcoal filter (see “Cleaning and care”).

Electrical connection

Refer to the notes in “Electrical connection” and “Warning and Safety instructions” before connecting to the electricity supply.

31