40
9. Digital noise reduction function setting [DNR]The digital noise reduction function reduces noise automatically under the condition of low illu-
minance. The effect level of the noise reduction function is selectable from the following:
LOW:Low level of noise reduction (small residual image)
MID:Medium level of noise reduction (medium residual image)
HIGH (default):High level of noise reduction (large residual image)
10. Image resolution setting [RESOLUTION]A resolution of camera images is selectable from the following:
NORMAL:Horizontal resolution of 480 TV lines or more
HIGH (default):Horizontal resolution of 540 TV lines typ.
Note:
When the electronic sensitivity enhancement function, "SENS UP", is activated under the
condition that "HIGH" is selected, noise may increase.
11. Settings in black-and-white mode [BW MODE]The settings regarding the black-and-white mode are performed.
Follow the procedure below for settings regarding the black-and-white mode.
**CAMERA SETUP** 1/2
CAMERA ID OFF
ALC/ELC ALC
SHUTTER OFF
AGC ON
SENS UP OFF
SYNC INT
WHITE BAL ATW1
MOTION DET OFF
DNR HIGH
RESOLUTION HIGH
BW MODE
**BW MODE**
BW OFF
BURST(BW) ON
RET TOP END
**BW MODE**
BW AUTO1
LEVEL HIGH
DURATION TIME .|..
S L
BURST(BW) ON
RET TOP END
"CAMERA SETUP" screen "BW MODE" screen "BW MODE" screen
Step 1
Move the cursor to "BW MODE" and press
the setting button.
→The "BW MODE" screen appears.
Step 2
Move the cursor to "BW" and select the
black-and-white control from the following:
AUTO1: Automatically toggles between color
and black-and-white images in accor-
dance with the screen brightness (illumi-
nance). The black-and-white mode is
selected for dark images, and the color
mode is selected for bright images.
AUTO2: Uses a near-infrared light source at
nighttime.
EXT: Is selected to control switching
between color and black-and-white
images after connecting an external
device to the external terminal (DAY/
NIGHT). (☞page 18)