Panasonic WV-CL930, WV-CL934 operating instructions How to use fixed focus lens

Notes:

•The adjustment procedure for general varifocal lenses is described as follows: For further information, refer to the operating instructions for the lens to be used.

1.Display a subject that exists as far as possible (10 m or more recommended) to adjust the back focus.

2.For 8-, or 10-fold magnification lenses, adjust the back focus after setting the zoom to the WIDE end and setting the focus to the FAR end.

For 2-, or 3-fold magnification lenses, adjust the back focus after setting the zoom to the TELE end and setting the focus to the FAR end.

3.Adjust the view angle and focus coarsely by adjusting the zoom and focus of the lens to center a subject in the screen, and then perform the main adjustment of the back focus (☞ pages 17 and 45).

•When a non-Panasonic lens that has an extended range for lens focusing is used, adjust the back focus after setting the focus to a position at a short distance from the FAR end in Step 2 described above. If adjustment is performed in the extended range, appropriate adjustment cannot be obtained.

How to use fixed focus lens

•For a fixed focus lens with focus adjustment, adjust the back focus after setting the focus of the lens to the FAR end.

. Adjusts the back focus.

Use the operation buttons (☞ page 9) for this operation.

The back focus is also adjustable in the setup menu. Refer to page 45 for how to operate and detailed explanation.

qPress the setting button after adjusting the view angle while viewing the video monitor.

wThe focus position indicator is displayed in the lower part of the screen, and the back focus is automatically adjusted.

eTo perform fine adjustment of the back focus after automatic back focus adjust- ment, use the right or left button.

NEARFAR

...................

INDICATOR XXXX

Notes:

•No operation for more than 10 seconds automatically clears the focus position indicator.

•Pressing the right and left buttons simultaneously resets the back focus position to the CS mount default position.

17