Turn the circuit breaker off which supplies this product with the power when abnor- mal conditions are encountered.

Avoid installing in the following locations.

Locations where it may get wet from rain or water splash

Locations where a chemical agent is used such as a swimming pool (not only outdoor)

Locations subject to steam and oil smoke such as a kitchen

Locations near flammable gas or vapor

Locations where radiation or x-ray emis- sions are produced

Locations subject to strong magnetic field or radio waves

Locations where corrosive gas is pro- duced

Locations where it may be damaged by briny air such as seashores

Locations where the temperature is not within –10 °C to +50 °C {14°F to 122°F}.

Locations subject to vibrations (This product is not designed for on-vehicle use.)

Locations subject to condensation as the result of severe changes in temperature

Installing place

Contact your dealer for assistance if you are unsure of an appropriate place in your partic- ular environment.

Make sure that the installation area is strong enough to hold this product, such as a con- crete ceiling.

Do not install this product in a humid or dust-laden environment.

Otherwise, lifetime of the internal parts may be shortened.

Be sure to remove this product if it is not in use.

Radio interference

When this product is used near TV/radio antenna, strong electric field or magnetic field (near a motor or a transformer), images

may be distorted and noise sound may be produced.

Mounting screws

Only the fixing screws are provided to fix this product with the camera mounting base. It is necessary to procure screws or bolts to mount this product. Prepare them according to the material and strength of the area where this product is to be installed. The screws and bolts must be tightened with an appro- priate tightening torque according to the material and strength of the installation area.

Do not operate this product beyond the specified temperature, humidity or power source ratings.

Use this product at temperatures within –10 °C to +50 °C {14°F to 122°F}, and humidi- ty below 90 %. The input power source is 12 V DC/24 V AC (WV-CL934) or 120 V AC (WV-CL930).

Avoid connections during a lightning storm.

Otherwise, an electric shock may be caused.

8

Page 8
Image 8
Panasonic WV-CL934, WV-CL930 Avoid installing in the following locations, Installing place, Mounting screws