Water softener
Water Softener
To avoid the
To ensure a steady supply of soft water the water softener unit must always be:
1.correctly set for the water hardness level in your area.
2.the salt reservoir must be filled.
(If the water hardness level is below 4 gr/gal (4 °d - German scale) the water does not need to be softened.)
The machine is set at the factory for a water hardness level of 19 gr/gal (19°d).
If the water supply is harder or softer than this (including below 4 gr/gal or 4 °d) the factory setting will need to be changed. For settings see chart.
Your local water authority will advise you of the water hardness in your area.
For fluctuating levels (e.g. 8 - 17 gr/gal or 8 - 17 °d) set the water softener to the highest setting (in this example to 17 gr/gal or 17°d).
The
^Enter your water hardness level here: °d / gr/gal
Setting the water softener
^Turn the machine off.
^Turn the program selector to "STOP".
^Press and hold the "Display" and "Start" buttons, and turn on the machine with the "On / Off" button. The actual program status "P..." is displayed.
The "Fill/Drain" indicator lights.
^Press the "Extra Drying" button once. "E01" (program level 1) appears in the display.
^Turn the program selector to the 6 o’clock position.
The number "19" is displayed (the factory water hardness setting in °d, equivalent to 19 gr/gal).
^Press and hold the "Display" button until the required value (water hardness in °d) is displayed.
The counter returns to "0" after reaching "60".
^Press the "Start" button. "SP" appears.
^Press the "Start" button once more. The setting will now be stored. The display clears.
The machine is now ready for operation.
12
