7. Buzzer

Programming special functions

7. Buzzer

A buzzer (30 secs) can be set for the following functions:

End of program = Buzzer constantly

Error = Buzzer sounds every other second

^Turn the program selector to "STOP".

^Turn the machine off.

^Press and hold the "Display" and "Start" buttons, at the same time turn the machine on with the "On / Off" button.

The display shows the current program status "P...".

The "Fill/Drain" indicator lights.

^Press the "Extra Drying" button once. "E01" (programming level 1) is displayed.

^Turn the program selector to "Intensive".

The display shows a figure between "90" and "93".

"90" = Buzzer turned off "91" = End of program "92" = Fault

"93" = All functions / End of program / Fault (default)

^Press "Display" until the desired function is displayed.

^Press the "Start" button. "SP" is displayed.

^Press the "Start" button again. The change has been saved.

Value set:

35

Page 35
Image 35
Miele 06 868 521, G 7856 installation instructions Programming special functions, Buzzer