Programming special functions
6.Delay start and setting the delay start time
The start of a wash program can be delayed up to 9 hours and 30 minutes in 30 minute increments.
Delay start should only be selected with the "Normal" and "Intensive" programs. The short programs cannot guarantee satisfying cleaning results when the residues are allowed to dry on because the start time is delayed.
a) To activate Delay Start
^Turn the program selector to "STOP".
^Turn the machine off.
^Press and hold the "Display" and "Start" buttons, at the same time turn the machine on with the "On / Off" button.
The display shows the current program status "P...".
The "Fill/Drain" indicator lights.
^Press the "Extra Drying" button once. "E01" (programming level 1) is displayed.
^Turn the program selector to "Drain" either "80" or "81" is displayed.
"80" = No Delay Start "11" = Delay Start active
^Press "Display" to change from "80" to "81" or vice versa.
^Press the "Start" button. "SP" is displayed.
^Press the "Start" button again. The change has been saved.
Value set:
b) Setting the delay start period
The delay start period (from 30 minutes to 9 hours 30 mins) must be set before a program is started.
^After selecting a program (see "Turning on") press or hold the "Display" button it until the required value is displayed. The "Delay Start" indicator lights.
After the "Start" button is pressed the delay start period will count down in the display until the program automatically starts.
34
