Programming special functions
8.
^Turn the program selector to "STOP".
^Turn the machine off.
^Press and hold the "Display" and "Start" buttons, at the same time turn the machine on with the"On / Off" button.
The display shows the current program status "P...".
The "Fill/Drain" indicator lights.
^Press "Extra Drying" seven times. "E07" (programming level 7) is displayed.
^Turn the program selector to any position (except "STOP").
The display shows either "00" or "PP". "00" = factory setting
(electronic was not reset). "PP" = Electronic was reset.
^If "PP" is displayed press "Display" to change from "PP" to "00".
^Press the "Start" button. "SP" is displayed.
^Press the "Start" button again. Values which had been changed are now reset.
If the hardness level setting in the water softener had been changed this will reset to the factory setting of 19 gr/gal (19 °d). This will need to be adjusted back to the hardness level in your area.
36
