Use
Turning on
^Close the door.
^Open the water supply (if closed).
^Press the On / Off
If the program selector is turned to "Stop" a dot lights in the display.
Starting a program
^Turn the program selector clockwise or counterclockwise to the required program. See the "Program guide" for information on the programs.
The display shows the first wash temperature of the selected program (except "Rinse" and "Drain"). The "Start" indicator flashes.
^If required select the additional feature "Extra Drying" . See "Selecting an additional feature".
^Press the "Start" button. The running time is displayed in ascending minutes.
The "Start" indicator lights.
Once the program has started all other programs are blocked. If the program selector is turned to another program during the running program, the values shown in the display will go out. The values appear again if the program selector is turned back to the running program.
^Press the "Display" button to alternate between the elapsed time and actual temperature in the display during the program.
Note: during the heating stage in "Main wash" and "Final rinse" the required end temperature is shown in the "time run" display field.
24
