Miele G 803 manual Before using for the first time, Procedure, lights, flashes

button b button c button d button e button f

Before using for the first time

Procedure... lights flashes

The correct water hardness is now programmed:

^Turn off the dishwasher with the “Off” (o) button.

To change the water hardness:

^Press the button that corresponds to the water hard- ness of your area. As long as the button is held in the

indicator will remain lit.

1 - 5 gr/gal ( 20 - 90 ppm):

6 - 7 gr/gal (110 - 130 ppm):

8 gr/gal (140 ppm):

9 - 11 gr/gal (160 - 200 ppm):

12 - 14 gr/gal (220 - 250 ppm):

15 - 70 gr/gal (270 -1260 ppm): see the following page

On + b	Salt
On + c	Salt
On + d	Salt
On + e	Salt
On + f	Salt

^ Release the button.	On	Salt + c
Other indicators may light depending on which features
have been selected:
^ Press g button.	On + g	Salt
^ Press the g button once more.	On	Salt + g
^ Turn the dishwasher off with the “Off” (o) button.
The programmed water hardness level is now stored in
the program memory.
^ To check the setting of the water hardness selector
(see “Setting the water hardness level in the wash
cabinet”).

15