Miele G 803 manual b c d e f, Before using for the first time, Procedure, lights, flashes

Before using for the first time

Procedure... lights flashes

^Open the door.

^Turn off the dishwasher using the “Off” (o) button.

^ Hold the buttons b and d in and at the same time	On	Salt
turn the dishwasher on with the “On” (g) button.
^ Release the buttons b and d.	On	Salt + c
Note: If any other indicators flash the process must
be repeated.
The following indicators will light, if:
– rinse aid was never added or needs to be refilled,	Rinse aid
– Heated drying is deactivated (see “Additional fea-	b
tures“),
– the water intake time has been increased (see “In-	d
creasing water intake time”),
– the end of program buzzer is deactivated	e
(see “Additional features”).
^ Press the c button.	On	Salt

As the water hardness is programmed an additional indicator will also light.

1	- 5 gr/gal ( 20	- 90 ppm):
6	- 7 gr/gal (110	- 130 ppm):
	8 gr/gal (140 ppm):
9	- 11 gr/gal (160	- 200 ppm):
12	- 14 gr/gal (220	- 250 ppm):

If the water hardness is programmed between

15 gr/gal and 70 gr/gal (270 -1260 ppm) an additional indicator will also light.

b c d e f

14