Solving problems
Checking the water level
If the water pressure is less than 15 psi, too little water may flow into the wash cabinet.
^ To check the water level, open the water valve completely and run the “Rinse & Hold” program once (with- out dishes), to bring water into the system.
^ Run the “Rinse & Hold” program again. After approximately 3 minutes,
open the door and remove the lower
basket from the machine.The water level is correct when dimen- sion “X” is at least 1/8 ”(4 mm).
^ If it measures less, the water intake time must be increased (see the fol- lowing page).
49
