Operating the dishwasher
Turning on the dishwasher
^Open the water valve, if closed.
^Open the door.
^Check that spray arms are not blocked.
^Press the “On” button (15). The “On“ indicator lights.
Starting a program
^When selecting a program, refer to the Program Chart .
^Press the button for the desired pro- gram.
The indicator for the selected program will light.
^Close the door.
The program starts.
Do not end a program prematurely or important program steps (e.g. re- activating the water softener) could be omitted.
End of a program
The end of a program buzzer sounds when a program has finished.
The buzzer will sound every ten min- utes.
Once the door is opened the buzzer will stop.
The end of program buzzer can be de- activated. (see “Additional features“).
Turning off the dishwasher
At the end of a program:
^Open the door a few inches (5 – 6 cm).
The program indicator goes out.
If the program indicator is still lit the program has not finished. Close the door so that the program may finish.
^Press the “Off” button (16). The “On” indicator lights.
The dishwasher will continue to use electricity until it has been turned off.
32
