Operating the dishwasher
End of program buzzer
A buzzer sounds to indicate the end of a program. The buzzer is activated at the factory. This buzzer can be turned off so that it does not sound.
Activating and Deactivating the End of program buzzer |
|
|
Procedure... | lights | flashes |
^Open the door.
^Turn off the dishwasher with the “Off” (o) button.
^ Press buttons b and d simultaneously and at the | On | Salt |
same time turn the dishwasher on with the “On” (g) |
|
|
button. |
|
|
|
|
|
^ Release buttons b and d again. | On | Salt + c |
Note: If any other indicator light is flashing, |
|
|
the process must be repeated. |
|
|
The following indicator lights may also light, if: |
|
|
|
|
|
– rinse aid was never added or needs to be refilled, | Rinse aid |
|
– Heated drying has been deactivated, | b |
|
– the water intake time has been increased | d |
|
(see “Increase water intake time”), |
|
|
– End of program buzzer is deactivated. | e |
|
|
|
|
36