Problem solving guide
Problem | Possible cause | Remedy |
The dishwasher stops | Not enough water is en- | Before searching for the |
during a program. | tering the machine. | problem: |
| The “Intake/Drain” indica- | Turn off the dishwasher. |
| tor flashes. | – Open the water valve |
|
| completely. |
|
| – Check the intake filter |
|
| and clean it if neces- |
|
| sary, see “Cleaning the |
|
| intake filter”. |
|
| – Check the water level |
|
| and increase the intake |
|
| time if necessary, see |
|
| “Checking the water |
|
| level”. |
|
|
|
| Drainage is restricted - | Before searching for the |
| water is still inside the | problem: |
| dishwasher at the end of | Turn off the dishwasher. |
| a program. The “In- | – Check for kinks in the |
| take/Drain” indicator | drain hose. |
| flashes. | – Clean the drain pump |
|
| and |
|
| see “Cleaning the drain |
|
| pump and |
|
| valve”. |
|
| – Clean the combination |
|
| filter, see “Cleaning the |
|
| dishwasher filters”. |
|
|
|
The indicator lights next | A service call may be | – Turn off the dishwasher |
to program buttons 1 to | needed. | and restart. |
5 flash. |
| If the indicators flash |
|
| again: |
|
| – Call the Miele Techni- |
|
| cal Service Depart- |
|
| ment. |
|
|
|
44